TitleCategoryUpload Date
Digi Script v1 Category: C G EditorsMar-07-2019

This is a PAL only C/G editor - It seems to only work reliably on VICE 3.1 or higher and only with a pal c64 model.

Platform: Commodore 64
Ultimate 64 Firmware v1.06 Category: ultimate 64Mar-07-2019

Ultimate 64 firmware v1.06:

  • SpeedDOS Parallel Cable (needs e.g. DolpinDOS roms)
  • Interface type: Ultimate Menu picture overlay (HDMI-only)
  • USB keyboard support. Like earlier firmware, press scroll/lock to enter/exit the Ultimate menu.
  • Replacement of Charrom and BAISC

Note for the Ultimate 64:
You will need a kernel, basic and character rom after the upgrade. These roms are not included in the update. These roms are distributed with vice-emu, but you can also find them on zimmermans.net.

For instance, you could use these roms: 901225-01.bin (char), 901226.bin (basic) and 901227-03.bin (kernal). Roms with the .rom extension should also work.

Platform: Commodore 64
Ultimate 64 Firmware v1.02 Category: ultimate 64Mar-07-2019


  • Sprite Collisions.
  • Illegal graphics fetches.
  • Sprite DMA timing.
  • Nuvie Player.
  • NMI handling improved in 6502.
  • Illegal reads when BA=0 masked out (“PLA” issue)
  • Added debounce on Restore Key.
  • KCS power cart fixed (sprite graphics error)
  • HDMI/DVI Compatibility.

.. and there are many improvements not present in the changelog.

Platform: Commodore 64
Ultimate 64 Firmware v1.10 Category: ultimate 64Mar-07-2019

Differences with previous release V1.0B

  • Based on Ultimate-II+ firmware Version 3.4
  • NTSC mode has been added. The switch can be found in the U64 Specific Settings menu
  • Added rudimentary support for USB Floppy disks (not completely done yet; as removal of floppy is not yet detected)
  • USB problems with low/full speed devices fixed; no more bus hang-ups in these cases. (No full HID support just yet..)
  • VIC collision problem fixed.
  • Improved 1541 compatibility; weak bit areas and floppy speed zones are now properly supported.
  • Various improvements 'under the hood'
Platform: Commodore 64
CCGMS Ultimate Category: CCGMSFeb-26-2019

CCGMS By Craig Smith, modded and improved by Alwyz.  This is the latest (01-25-2019) release of CCGMS with many improvements and in particular support for the Ultimate 64 by Gideon.  See screen shot #3 for additioinal info on what's been improved and fixed.

Platform: Commodore 64
Multi-Easy Category: EasyFlash CollectionsFeb-25-2019

Multi-Easy by Lord Crass (2013) is a cartridge image designed for the Easy Flash 3 which contains many useful utilities and games while only taking up a single programming slot on the Easy Flash.  See the screenshot for details on what's included in the cartridge.

Platform: Commodore 64
Microsoft Multiplan v1.07 Category: SpreadsheetsFeb-22-2019

Microsoft Multiplan v1.07 for both the Commodore 64 and Commodore 128.  I got this to work in VICE 2.4 on both, but only in 40 column mode on the C128 emulation.  Probably works fine in 80 Column on a real C128.

Platform: Commodore 64
Ultimate 64 Firmware v1.0B Category: ultimate 64Feb-22-2019

Apparently the version numbers are hex and not decimal.

Differences with previous official release V1.06

  • SID has been improved quite a bit.
    • The internal SID is now consistently referenced as "UltiSID", to avoid confusion with other SID products.
    • Various bugs, like the phase of the filters, and the routing of Voice 3 when the VOICE3OFF bit was set have been corrected.
    • A number of SID filter curves have now been implemented and can now be chosen from the configuration menu.
    • The resonance can be changed to two different settings.
    • Combined waveforms can now be selected between 6581 and 8580.
    • Internal bus charge in the SID is now emulated.
  • The 6502 core has been improved. All 'stable' illegal instructions are now fully operational:
    • SLO $07 $17 $03 $13 $0F $1F $1B
    • RLA $27 $37 $23 $33 $2F $3F $3B
    • SRE $47 $57 $43 $53 $4F $5F $5B
    • RRA $67 $77 $63 $73 $6F $7F $7B
    • SAX $87 $97 $83 $8F
    • LAX $A7 $B7 $A3 $B3 $AF
    • DCP $C7 $D7 $C3 $D3 $CF $DF $DB
    • ISC $E7 $F7 $E3 $F3 $EF $FF $FB
    • ANC $0B
    • ANC $2B
    • ALR $4B
    • ARR $6B (including decimal mode!)
    • SBX $CB
    • SBC $EB
    • LAS $BB
    • LAX $AB is stable with constant 00.
  • U64 settings are now restored when the machine resets. This resets the SID settings after using Auto Config + internal SID player.
Platform: Commodore 64
Turbo Rascal Syntax Error v0.06.3 Category: Programming ToolsFeb-20-2019

Turbo Rascal Syntax error - (Turbo Rascal SE, TRSE) is a complete suite (IDE, compiler, programming language, image sprite level resource editor) intended for developing games/demos for the 8-bit 6502 line of computers (C64, C128, VIC-20, NES) with a focus on the Commodore 64. With the benefits of a modern IDE (error messages, code completion, syntax highlightning etc) and a bunch of fast built-in tools, it has never been easier to program for the Commodore 64.

This is the Windows x64 version.

Platform: Windows
Easyflash 3 Dumper v2.0 Category: Easy FlashFeb-20-2019

Dumping EasyFlash Cartridges (with save games etc.) through USB with EasyFlash 3 has never been this fast or easy. G*P gives you EZF Easyflash Cartridge Dumper V2.0 coded by L.A.Style. Enjoy!

Platform: Commodore 64
Easyflash 3 IRC v1.0 Category: Easy FlashFeb-18-2019

This is a basic implementation of and IRC client on the C64 computer that has an Easy Flash 3 cartridge connected to the PC via USB cable.  More information inside the archive.  This consists of both a Commodore 64 and PC program.

Platform: Commodore 64
Easyflash 3 BBS v1.0 Category: Easy FlashFeb-18-2019

Easyflash 3 BBS v1.0 - This is a simple BBS client for the C64 that has an Easy Flash 3 cartridge connected to the PC via USB connection. Basically it is a telnet client, but it is mostly used to connect to the numerous C64 BBS servers that are still out there. More info inside the archive

This archive consists of  both a Commodore 64 and PC program.

Platform: Commodore 64
C64NET Wifi Apps (08-15-18) Category: C64NET WifiFeb-18-2019

This is the latest (08-15-2018) software apps and utilities for the Bo Zimmerman C64Net Wifi adapter for the Commodore 64.

Platform: Commodore 64
geoTelnet v1.3 Category: GEOS UtilitiesFeb-17-2019

geoTelnet v1.3 by Bo Zimmerman - a full featured TELNET client for 40-column GEOS, Wheels, etc. The client supports the important TELNET codes directly, allowing you to remotely log into systems that support it and issue commands. It supports a standard ASCII terminal, but also supports ANSI fully enough to use complex applications remotely, such as VI, LYNX, TOP, and others. The client has auto-echo and buffering features for users with a free Ram Expansion bank. All this in a simulated 80 column screen, with "close enough" color matching to make it usable.


Platform: Commodore 64
Preboot 128 v1.4 Category: Disk MenusFeb-17-2019

Preboot v1.4 by Brian Green (2016-2017) of the Particles BBS fame (http://www.particles.org) - This is a really cool boot loader for the Commodore 128 that works in conjunction with a CMD HD (or clone) and / or a RAMLink.  With this utility, you can choose which partition you boot from.  Here are some words from the author himself:

Preboot (currently at version 1.4) is an auto-boot menuing system I’ve created for the Commodore 128 in 80-column mode out of necessity. I own a CMD-HD (and clones) and when I turn on the 128, it boots whatever my default partition is – normally Wheels 128, or GEOS, or something else. If I don’t feel like booting into one of those systems, I have to RUN/STOP-RESTORE it before it boots too far. This is where the name Preboot comes in.

Platform: Commodore 128
DTJ BBS Programming Guide Category: dtj does the job bbsFeb-17-2019

This is the programmers guide for DTJ (Does The Job) BBS.  Looks like it was published in late May or 1994 so there could be some info missing or incorrect because I've seen versions of the BBS that came out in 1995.

Platform: Commodore 64
Hoxs64 v1.0.18.0 (32 & 64 Bit) Category: Hoxs64Feb-17-2019

Hoxs64 written by David Horrocks is a Commodore 64 emulator for Microsoft Windows 2K/XP/Vista/Seven (DirectX 9+)

The emulator substantially reproduces this legacy machine in minute detail.

Changelog (v1.0.18.0):

Platform: Windows
Hoxs64 v1.0.17.0 (32 & 64 Bit) Category: Hoxs64Feb-17-2019

Hoxs64 written by David Horrocks is a Commodore 64 emulator for Microsoft Windows 2K/XP/Vista/Seven (DirectX 9+)

The emulator substantially reproduces this legacy machine in minute detail.

Changelog (v1.0.17.0):

  • VIC emulation improvement to accurately emulate the early C-Data usage whenever X-Scroll is decreased by 4 or more.
Platform: Windows
WXterm Category: Miscellaneous Terminal ProgramsFeb-17-2019

WXTerm or possibly Son of Quasimodem by Tom Brown is a very simple terminal program, but it supports Punter, Xmodem/RCR and Wxmodem transfer protocols.

Platform: Commodore 64
Terminal 1 v8.17 Category: Miscellaneous Terminal ProgramsFeb-17-2019

Terminal 1 v8.17 by Phil Kemp, released August 1990.  This is possible the last version of this program that was released and it doesn't seem quite finished.

Platform: Commodore 64